Σύστημα κοψίματος πλάσμα

Microprocessor-controlled inverter semi-automatic welding machine for MIG-MAG, FLUX, TIG Lift, and MMA welding. Welding current 200A. Power supply 230V. Welding wire diameter 0.6-1.0mm. 2-roll wire feeder. Synergy Technical parameters TECNOMIG 201 SYNERGIC is an inverter synergic semi-automatic welding machine designed for arc welding using MIG/MAG, TIG LIFT, MMA, and FLUX methods. The device is designed for a wide range of applications: from maintenance work to car body repairs. TECNOMIG 201 is used for welding stainless steel, carbon and low-alloy steels, and aluminum. Welding is performed in an inert, active, or mixed gas shield and with reverse polarity without gas. The device has 9 synergic programs for welding steel. Quick synergic adjustment of welding parameters via a clear control panel makes the device very easy to use. Simply set the thickness of the welding wire and the type of gas and start welding: the intelligent and automatic arc control system will select the best parameters step by step for each welding position and material. The user can also manually set the arc length and adjust the appearance of the weld to their needs. The welder has functions that facilitate the MMA welding process with a coated electrode: ARC FORCE: short-circuit current adjustment - facilitates the transfer of the molten electrode drop to the welded material, preventing arc extinction when the electrode drop contacts the weld pool HOT START: hot start adjustment - facilitates electrode ignition by providing higher welding current at each arc ignition. ANTI STICK: anti-short-circuit - automatically turns off the welding voltage if the electrode sticks to the welded material, making it easier to detach and preventing accidental arc formation Physical parameters The device has a fan cooling system that activates only when needed, significantly increasing its efficiency and reducing internal contamination. The device is equipped with overload protection, increasing its reliability. Power parameters Single-phase power supply. The device is equipped with a power plug. Equipment The delivery includes the device with a MIG 15 welding torch with a length of 3 meters, a ground cable with a length of 2 meters, and an electrode cable with a length of 2 meters. Warranty conditions 12-month warranty for professional use.

Network protection C25A Rated supply voltage 230 V; 50Hz (1ph) Power 6.7 kW Open circuit voltage 65 V Maximum current 200 A (MIG) / 180 A (MMA) Current at 100% duty cycle 155 A Current at 60% duty cycle 200 A (MIG) / 180 A (MMA) Aluminum wire diameter 0.8 - 1.0 mm Self-shielded wire diameter 0.8 - 0.9 mm Steel wire diameter 0.6 - 1.0 mm Stainless steel wire diameter 0.6 - 0.8 mm Welding electrode diameter 1.6-4.0 mm Welding current adjustment range 40 - 200 A Wire spool size D200 (2kg and 5kg) Protection degree IP 23 Device / set weight 12 / 15 kg Overall dimensions L x W x H 465x190x370 mm Packaging dimensions L x W x H 640x280x460 mm