Σύστημα κοψίματος πλάσμα

Inverter professional semi-automatic welding machine for MIG-MAG, FLUX, and MMA shielded electrode welding. Welding current 250A. Power supply 230/400V. Welding wire diameter 0.6-1.0mm. 2-roll wire feeder. Technical parameters TECNOMIG 250/2 PRO MMA DIGITAL is an inverter semi-automatic welding machine designed for arc welding using MIG/MAG, MMA, and FLUX methods. The device is designed for a wide range of applications: from maintenance work to car body repairs. TECNOMIG 250/2 PRO is used for welding carbon and low-alloy steels as well as aluminum. Welding is performed in an inert, active, or mixed gas shield, and with reverse polarity without gas. The device is equipped with inductance regulation. Physical parameters The device has a fan cooling system, which significantly increases its efficiency. The device is equipped with overload protection, which increases its reliability. Power parameters Single-phase (230V) and inter-phase (400V) power supply. The device is equipped with a power plug. Equipment The delivery includes the device with a MIG 15 welding torch with a length of 3 meters, a ground cable with a length of 2 meters, and an electrode cable with a length of 2 meters. Warranty conditions 12-month warranty for professional use. PHYSICAL PARAMETERS Wire spool size 15 kg / 5 kg Protection degree IP21S TECHNICAL PARAMETERS Power 5.9 kW Open circuit voltage 56 V Current at 60% duty cycle 200 A Aluminum wire diameter 0.8 - 1.0 Self-shielded wire diameter 0.8-1.0 Steel wire diameter 0.6 - 1.0 Stainless steel wire diameter 0.6 - 0.8 Welding electrode diameter 1.6 - 4.0 Welding current adjustment range 30 - 250 A POWER PARAMETERS Rated supply voltage 230/400 V; 50Hz (1ph/2ph)