Συσκευή πλυσίματος τροχών

Adapter - dispenser designed for filling off-road, agricultural, and industrial vehicle tires with liquid through a 16 mm valve socket. The adapter is essential in the process of weighting the tire. The adapter consists of a hose, a valve adapter with a vent, and a dispenser with a nipple for a 13 mm diameter hose. Filling tires with liquid is a very economical solution. It is very often used in agricultural machinery wheels due to the weighting of the rear wheels. A major advantage is also better traction and good machine stability if the wheel is weighted with liquid. Application: Filling off-road, agricultural, and industrial vehicle tires with liquid. Usage instructions: Position the wheel so that the valve is at the top of the tire. Unscrew the valve core, then insert the entire hose into the tire through the valve and tighten the adapter to the valve. The dispenser with a nipple, previously crimped into the hose and connected to the liquid supply source, is tightened to the adapter. Fill the tire with liquid up to 75% of the tire's volume. It is very important not to exceed the recommended amount for safety reasons. The pressure in the tire increases during operation and may lead to tire damage. After filling the tire with liquid, remove the adapter, screw in the core, and inflate the tire with air. Very important: Filling the wheel with liquid is only possible if the steel cord is fully covered with a rubber layer. We can fill tires 100% only if we work in positive temperatures. In negative temperatures, the tire should be filled with a mixture.

Μήκος λαστιχένιου σωλήνα: 51 εκ., Ύψος προσαρμογέα για τη βαλβίδα: 4 εκ., Συνολικό ύψος νίπλα: 5 εκ., Τύπος βαλβίδας: VG12, Μέγεθος σωλήνα: 13 χιλ.