Πρόσθετα λαδιού

Ceramizer for four-stroke gasoline, diesel, LPG, CNG, BIO engines. Benefits: Reduces oil consumption (so-called oil taking, oil burning). Reduces fuel consumption by 3 to 15%. Quiets and smooths engine operation, improves vehicle dynamics. Equalizes compression pressures in cylinders. Regenerates friction surfaces. Facilitates cold engine start. In many cases, it helps avoid costly engine repairs, protects the engine from wear (especially in heavily used units). Regenerates friction surfaces during operation without disassembling the treated unit. Effective durability of the rebuilt surface for about 70,000 km of mileage. Increases the durability of metal friction surfaces up to 5 times. In most cases, it replaces repairs, significantly reducing repair costs compared to traditional overhauls. Low friction coefficient below 0.02, i.e., 10 times less than "steel-steel" contact. Extends oil change intervals by at least 50%. In case of emergency oil leakage, the created ceramic-metal layer allows driving continuation for over 500 km (evidenced by the no-oil driving test). Protects components from corrosion and aggressive chemical substances (important when the used engine oil or fuel may be of low quality). Reduces emissions of toxic exhaust components. Reduces the risk of piston ring blockage. Hardens and increases wear resistance of friction surfaces up to 10 times. Microhardness - 4000-4500 MPa (400 - 450 kG/mm2) (for comparison, the microhardness of steel is on average 60 kG/mm2). Compressive strength: 2500 MPa (250 kg/mm2). Protects the natural environment. The product can be used for any devices (including industrial ones) after prior consultation with the manufacturer of Ceramizers®. The regeneration and ceramic layer formation processes occur during normal operation and without disassembling the drive unit.