Παλμογράφος, πολύμετρα, καλίμπρες

The Scope DT oscilloscope is a device aimed at the automotive industry. It features two isolated channels and two differential channels, minimizing the risk of damage to the device or tested components in case of incorrect connection. It includes a built-in library of sample waveforms along with educational materials about the tested components. Assistance regarding operation and measurements is directly included in the device. The device has a Diagnostic Mode – 27 components with information on construction, operation, and how to diagnose them using the oscilloscope. Help is available in the device interface – it cannot be lost. Only a "Quick Start" guide is included with the device – the most important information about battery charging, buttons, etc. Access via a browser – a simple web interface allows downloading waveform files, screenshots, and displaying the device screen. This enables the device to work with any computer, tablet, or phone equipped with a browser and operating on the same WiFi network. Therefore, it works independently of the operating system and no application is required. For updates, an Internet connection via WiFi is sufficient – the device independently downloads data from the server, no additional applications are needed. - 7” screen with a resolution of 800×480. The device is operated with buttons next to the screen. - Powered by an internal Li-Ion battery providing several hours of continuous operation (approx. 6 – 8). - Charging via the included power adapter (12V voltage) in about 2.5 hours. - The set includes two classic oscilloscope probes and two probes with banana/crocodile plug ends. - Maximum sampling rate of 25Msps, bandwidth up to 5MHz for differential channels and over 1MHz for isolated channels. - Time base adjustable from 1us/div to 500s/div. - Gains from 20mV/div to 50V/div. - 2 channels fully galvanically isolated from the rest of the device (up to 1kV DC) and 2 differential. - Isolated channels accept voltages in the range of +/- 100V (+/- 200V temporarily) without additional probes. - Differential channels accept voltages of +/- 50V. (For comparison, ScopeTester allowed measuring voltages up to 20V max without additions). - Current clamps can be used as with any other oscilloscope. - Available probe calibration signal output (1kHz). Specification: Display: 7’’ 800×480 Maximum sampling rate: 25 Mbsps ADC converters: 12bit + 8bit Channels 1 and 2 Input voltages -100 .. 100V (peak -200 .. 200V) Input parameters: 1MΩ, 18pF Input type: DC, AC Galvanic isolation: up to 1kV DC Bandwidth: 1.5MHz Channels 3 and 4 Input voltage -50 .. 50V Input parameters: 1MΩ, 18pF (differential input) Input type: DC Bandwidth 5MHz Probe calibration output: 1kHz / 3.3V Vpp Internal memory: 8GB Power supply: Li-ion battery 7.2V Charging: external power supply 12V 2A Charging time: up to 2.5h Operating time: up to 8h Operating conditions: Temperature 0 – 50ºC, Humidity < 95% Weight: 960g Set contents: – Scope DT device – Oscilloscope probe with 1:10 divider – 2 pcs. – 1m measurement cable with banana and crocodile plugs – 2 pcs. – Probe calibration adapter – 12V power adapter