Memory Saver (εργαλείο διατήρησης μνήμης)

The Vehicle Power Support Device MS-7E is a product used during work with a disconnected battery. This type of device ensures voltage maintenance in the vehicle's electrical network, allowing all system components, including electronic controllers, to operate where it is necessary to remember work settings. This allows for the performance of appropriate tasks with a disconnected battery without the need to reset work parameters from scratch, which shortens the service time in a vehicle with a disconnected battery. At the same time, there is no need to enter security codes, which are not always available. Therefore, this type of device is used in many professional car workshops that care about the quality and efficiency of their service or repair work. Key features: • Device designed to maintain controller memory with a disconnected car battery. • Very useful when replacing the battery. • Prevents data loss and resetting of all devices. • Connection to the vehicle via EOBD socket or cigarette lighter socket. • Thanks to the LED control panel, it is possible to monitor the internal battery status in real-time. Technical data: • Internal battery: AGM • Voltage: 12V • Battery capacity: 7 Ah • Dimensions: 24.5 cm x 24.5 cm x 18 cm • Weight: 3 kg The distinctive features of the device allow for meeting such requirements during work in a car workshop as: • Performing service tasks without the need to configure radio settings • Performing service tasks without the need to program window opening settings • Performing service tasks without the need to program sunroof settings • Performing service tasks without the need to program the display • Performing service tasks without the need to program the phone • Performing service tasks without the need to program the rain sensor • Performing service tasks without the need to program central lock settings • Performing service tasks without the need to program clock settings • Performing service tasks without the need to program lighting settings • Performing service tasks in a way that minimizes repair time, thus saving money • Performing service tasks protecting oneself from airbag explosion due to electrical system surge Meeting the requirements set for our device is ensured in a much wider area than mentioned above and depends only on the user's imagination. The usage method involves performing a few simple operations. After preparing the device for voltage maintenance, we connect it to the OBD socket or the cigarette lighter power socket in the vehicle. After connecting the MS-7E to the appropriate socket, we disconnect the battery that has been powering the vehicle's electrical system so far. After performing the necessary operations on the disconnected battery, we connect a battery with appropriate parameters adapted to the serviced vehicle, after which we can safely disconnect the MS-7E device and remove the plug from the power socket. Such simplicity of use allows for operations even by beginner mechanics while ensuring the highest safety standards. The set is equipped with functions and elements such as: • Cable allowing connection of the device to the cigarette lighter socket • Cable allowing connection of the device to the OBD socket • Cigarette lighter socket • AGM battery mounted inside the device housing • Control of the battery status mounted inside the device housing • Switch changing the battery status mounted inside the device housing • Socket allowing charging of the battery mounted inside the device housing • Battery charge status indicator mounted inside the device housing • A compartment appropriately adapted to the dimensions of the charger, allowing safe and convenient storage of cables and the power supply enabling charging of the battery mounted inside the device housing. Type of battery: • Battery mounted inside the device housing type AGM (12V DC; 7Ah) MS-7E device dimensions: • Height: 24.5 cm • Width: 24.5 cm • Length: 18 cm