Φορτιστής μπαταρίας

PULSE 30 EVO 12/24V is a multifunctional electronic charger with PULSE TRONIC technology for servicing WET, GEL, AGM, Lithium, MF batteries. Power supply 230V. Charging voltage 12/24V. Charging current 40A. PULSE 50 EVO 12/24V is a multifunctional electronic charger for charging WET lead-acid, GEL, Lithium, AGM with fiberglass mat (MF maintenance-free, spiral, for Start-Stop systems) batteries, for automatic charging and maintenance with PULSE-TRONIC technology. It is equipped with an advanced function for desulfating batteries. It is very easy to use thanks to the automatic recognition of the type of battery being charged and the user-friendly control panel. The 8-step charging process ensures optimal battery charging conditions: EXAMINATION (checking the battery charge status, verifying the correctness of the set voltage), DESULFATION (detection and regeneration of sulfated batteries) ANALYSIS (battery condition analysis allows detecting a faulty battery) MAIN CHARGING (maximum current to achieve 80% charge state) FINAL CHARGING (decreasing current to achieve 100% charge) CHECKING (checking operation, verifying if the battery maintains the charge state) MAINTENANCE (charging with constant voltage) PULSE (impulse regeneration). Control panel functions: CHARGING CHARGE AUTO – automatic charging: automatic current selection during charging and maintenance depending on battery capacity MAINTAIN – maintenance charging: pulse charging through PULSE TRONIC technology MONITOR – charging status control: continuous monitoring of charging phases BOOST – fast charging and automatic transition to maintenance phase when charging is complete REGENERATION DESULFATION – desulfation: pulse regeneration process of sulfated batteries allows removing sulfates from lead plates and results in recovering battery capacity MEMORY – retaining last settings: each time the charger is turned on, it automatically sets the last remembered parameters (helpful for repeated use and power outages) PROTECTION – full safety and protection against reverse polarity, terminal short circuit, overload, and charging a faulty battery ECONOMY – minimal power consumption, automatic shutdown after a period of inactivity LOW VOLTAGE – charging batteries with very low initial voltage to a minimum of 2V CALIBRATION – calibration of output cables depending on their length guarantees optimal parameters delivered to the battery during charging and to the vehicle during diagnostics. Possibility of wall mounting using a bracket (available separately). 12-month warranty. Price of the device with 2m output cables.

Nominal supply voltage 230V; 50Hz (1ph) Power 610 W Protection degree IP33 Weight 3.13 kg Package dimensions L x W x H 330x200x130 mm Charging voltage 12 / 24 V Charging current 45 / 23 A Fast charging current (boost) 40 A Nominal battery capacity Ah 15h (min/max) 10 - 600 Ah Nominal charging current EN 60335-2-29 40 / 20 A