Ειδικά εργαλεία συστήματος οδήγησης και ανάρτησης

Hydraulic spring vise ∙ with 10 spring plates Can be used for almost any coil spring shock absorber and damper in the range of passenger cars and light commercial vehicles Also for MERCEDES-BENZ C-Class (W203), newer BMW and VAG coil spring shock absorbers, with electronic dampers (EDC, DCC) By gripping the springs within the coil turns, any possible inconvenient parts on the shock absorber are irrelevant and do not affect the operation of the spring vise Can be used for both left- and right-hand springs Precise setting of the spring and shock absorber Also for separating steering knuckles and coil spring shock absorbers by relieving the coil spring shock absorber directly on the vehicle without removing the axle shaft, possibly eliminating the need for axle adjustment A tripod with attached rollers allows for storage and mobile work with the spring vise – no need for a workshop table space Reversing the support frame for using the spring vise as additional hydraulic support and can be used with a force of 2.1 tons, e.g., for work on control arms or supporting joints The "quick pin" mechanism allows for quick and easy movement of the spring vise to use three functions: gripping the spring, separating steering knuckles from coil spring shock absorbers, and as hydraulic support Solid tripod foot with locking element and positioning mechanism for stable and balanced support When tensioning old springs, which are more prone to breaking, a solid safety belt serves as an additional safety feature Includes all spring plates (4x V4352, 4x V4353 ∙ 2x V4354) A hydraulic pump with a working pressure of 700 bar (V2846 / V2847) is required for operation Weight: 44 kg Load capacity: 2.1 tons Stroke: 430 mm Spring plate diameter ⌀ 70 – 160 mm Pre-tensioning the spring One of the functions of the spring vise is to compress the spring after installation. This is used to separate the entire spring unit from the steering knuckle. There is no need to loosen the drive shaft and supporting joint. This results in significant time savings. Other systems require additional tools for this application Spring tensioning Movable gripping jaws ensure optimal fit to the coil spring stroke. The result is a larger contact area on the spring and prevention of surface damage to the spring. The height of the V4476N spring vise can be adjusted to fit different lengths of shock absorbers and springs. A high degree of safety and flexibility is guaranteed when all precautions are followed. Safe operation is ensured by the rear handling of the spring vise, minimizing the risk of injury. A permanently mounted safety belt serves as additional protection against spring breakage during the tensioning process Integrated support The spring vise can also be transformed into hydraulic support. In this application, 2.1 tons of compressive force are a practical aid when working on steering or supporting joints Information about the coil spring shock absorber The coil spring shock absorber in a vehicle has a tensioned spring that is under enormous pressure from the car body resting on it. To ensure safety and driving comfort, it absorbs shocks and impacts. However, the spring is a sensitive part that wears out due to continuous load To guarantee safety, the spring must be immediately replaced if it is damaged. Since replacing springs is a high-risk activity, it should be carried out with professional tools. Depending on the vehicle, high forces are required for replacing chassis parts